Art & Design


BABY GROOT
ABOUT THIS PROJECT
Product Process: Designed and supported in Creation Workshop
Resin: Daylight Firm Grey
Printer: Liquid Crystal HR
Print Resolution: 50 Microns
Print Time: 56 hours 58 minutes
Dimensions: 19cm (h) x 18cm (w)
Resin Consumption: 176g
Estimated Cost: 612฿
DEMON
ABOUT THIS PROJECT
Process: Supported in Creation workshop. Castle is hollow with walls 2mm thick.
Resin: Daylight Firm Grey
Printer: Liquid Crystal HR
Resolution: 100 microns
Print time 28 H
Dimensions: 131mm x 205mm
Estimated Cost: 622฿
DINOSAUR
About This Project
Process: Supported in Creation workshop.
Resin: Daylight Firm Cream
Printer: Liquid Crystal 10″
Resolution: 100 microns
Print time 14h 57 min
Dimensions: 198mm x 74mm x 99mm
Estimated Cost: 689฿
ROOKS LIQUID CRYSTAL PRO
ABOUT THIS PROJECT
Process: Designed and supported by Creation
Workshop. Printed using Printflow3D software on Liquid Crystal HR touchscreen
Resin: Daylight Amber Hard
Printer: Liquid Crystal Pro
Resolution: 100 Micron
Print Time: 14 hours 45 Minutes (Full platform)
Dimensions: 51mm x 30mm x 9mm (Single Rook)
Resin Consumption: 817.8g (Full platform)
Estimated Cost: 2,536฿ (Full Platform)
ROBOT
ABOUT THIS PROJECT
Process: Designed and supported by Creation
Workshop. All parts were printed separate and after built together using screws. After they were built together gaps between parts where closed using same resin and then sanding.
Resin: Daylight Firm Grey
Printer: Liquid Crystal 10″
Print resolution: 100 microns
Print Time: 28h 50min
Outer dimension: 22cm x 14cm x 5.5cm
Resin Consumption: 404g
Estimated cost: 1,095฿
SMALL ROOKS
ABOUT THIS PROJECT
Process: Designed and supported by Creation Workshop. Printed using Printflow3D software on Liquid Crystal HR touchscreen
Resin: Daylight Hard Cream
Printer: Liquid Crystal HR
Resolution: 100 Microns
Print Time: 3hour 8 minutes
Dimensions: 23.67mm x 14mm
Resin Consumption: 22g
Estimated Cost: 76฿
FISH
ABOUT THIS PROJECT
Process: Supported in Creation workshop after stick eyes using glue
Resin: Daylight Hard Black (Body) Daylight Flexible Red (Eyes)
Printer: Liquid Crystal 10″
Resolution: 100 microns
Print time 13h 15 min
Dimensions: 18cm x 8cm x 9.5 cm
Estimated Cost: 571฿
CASTLE
ABOUT THIS PROJECT
Process: Supported in Creation workshop. Castle is hollow with walls 2mm thick.
Resin: Daylight Hard Grey
Printer: Liquid Crystal HR
Resolution: 100 microns
Print time 29h 25 min
Dimensions: 21cm(H) x 13cm(W) x 14 cm(D)
Estimated Cost: 1,117฿
CATHEDRAL
ABOUT THIS PROJECT
Process: Supported in Creation workshop.
Resin: Daylight Firm Cream
Printer: Liquid Crystal Pro
Resolution: 100 Microns
Print Time: 94 Hours
Outer Dimensions: 428mm x 181 mm x 262mm
Resin Consumption: 1400g
Estimated Cost: 4,862฿
ROSE WITH VASE
ABOUT THIS PROJECT
Process: Supported in Creation workshop. After printing the rose has been spray painted with white spray, vase and stems are the original resin colour.
Resin: Daylight Hard Green (stems) and Daylight Hard Cream (Head)
Printer: Liquid Crystal 10″
Resolution: 100 microns
Rose Stems: 28h 15 minutes (All 5 stems)
Rose Head: 22h 30 minutes (All 5 roses)
Vase: 12h 56 minutes
Dimensions: 25cm height
Estimated Resin Consumption:
Rose Stems: 71g (All 5 Stems)
Rose Head: 12.65g (All 5 Roses)
Vase: 75g
Estimated Cost: 1,362฿
 
CRYSTAL TOWER
GREEK HEAD
Powered by MakeWebEasy.com