Jewellery


CAGE RING
ABOUT THIS PROJECT
Resin: Daylight Castable
Printer: Liquid Crystal HR
Resolution: 50 Microns
Print Time: 4 hours 7 minutes
Outer Dimensions: 23.77mm x 26.80mm x 5.4mm
Resin Consumption: 0.6g
Estimated Cost: 2.09฿
Casting Process: (To attain a silver ring):
1. From Room temperature to 250 °C at a speed of 200 °C per hour.
2. Hold at 270 °C for 3 hours.
3. From 270 °C to 730 °C over 4 hours at 150°C per hour
4. Hold at 730 °C for 4 hours.
5. Allow to cool naturally with furnace door ajar to casting temperature.

COLLECTION OF RINGS
ABOUT THIS PROJECT
Process: Ring Models designed by a CAD package have been printed by Liquid Crystal HR.
Application: The purpose of this practice is to make acute 3D parts to undergo casting process and making rings moulds.
Resin: Daylight Amber Hard
Printer: Liquid Crystal HR
Print Resolution: 100 Microns
Outer Dimensions:
Cage Ring (back row): 23.84mm x 13.19mm x 27.57 mm
Dot Ring (middle row): 19.78mm x4.95mm x 19.79mm
Double Ring (front row): 19.32mm x5.63mm x 19.99mm
Resin Consumption: 9.55g (Full platform)
Estimated Cost: 33฿ (Full platform)
RINGS
ABOUT THIS PROJECT
Process: Designed and supported by Creation Workshop. Printed using Printflow3D software on Liquid Crystal HR touchscreen
Resin: Daylight Amber Hard
Printer: Liquid Crystal HR
Print Resolution: 100 Microns
Print Time: 3 hour 9 minutes
Resin Consumption: 43.8g (Full platform)
Estimated Cost: 152฿ (Full platform)
RINGS
ดูรูปชิ้นงานเพิ่มเติมได้ที่ 


Powered by MakeWebEasy.com